TS-1084
Replacing the X-axis
Idler Pulley
Document Owner:
Service Department
Effective Date:
AUG-23-2022
Page 4 of 4
11. Tighten the X-axis tension screw to the tension noted in step 3. If available, use the
sonic tensioner to check the tension.
12. Tighten the bracket screws so the tension bracket does not move.
13. Replace the hood of the unit.
14. Power the unit ON. Wait for the beep.
15. Open the software, and HOME ALL.
16. Test operation as normal. Rack Positions need to be re-taught, because removing the
belt changes positioning.
If you need additional assistance, please call our service department at 314-298-9800
or email
.
Definitions
N/A
Revision History
Version: Change:
Effective Date:
Approved by:
A
New
AUG-23-2022
Service
File Location: DMS
Revision A Approved Date: AUG-22-2023 Approved by: Service
