TS-1084
Replacing the X-axis
Idler Pulley
Document Owner:
Service Department
Effective Date:
AUG-23-2022
Page 3 of 4
7. The belt should be loose enough to pull off the pulley and let it loosely hang as shown in
Figure 4 below.
Figure 4.
8. Remove the bearing using the provided 1/8 allen wrench, as shown in Figure 5 below.
Figure 5.
9. Replace with the provided new pulley.
10. Slip the belt back on the new pulley.
File Location: DMS
Revision A Approved Date: AUG-22-2023 Approved by: Service
