5
MS-(H)-Pro Digital（Hotplate）Magnetic Stirrer
3 Inspection
3.1 Receiving Inspection
Unpack the equipment carefully and check for any damages
which may have arisen during transport. If it happens, please
contact manufacturer for technical support.
Note:
If there is any apparent damage to the system,
please do not plug it into the power line.
3.2 Listing of Items
The packing includes the following items:
Items Qty
Main unit 1
Power cable 1
Stirrer bar 1
User manual 1
Table 1
4 Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be earthed reliably.
• Ensure the power be off
• Plug in the power cable
，
ensure the power be on and
begin initializing.
• Add the medium into the vessel with a stirring bar.
• Put the vessel on the workplate.
• Set the rated stirring speed and start stirring.
• Observe the stirring bar and LCD display.
• Set the rated temperature and start heating.
• Observe the real temperature on LCD display.
• Stop the heating and stirring functions.
If these operations above are normal, the device is ready
to operate. If these operations are not normal, the device
may be damaged during transportation, please contact
manufacturer for technical support.
Summary of Contents for MS-H-Pro
Page 2: ......
