7
6.
Function: Heating
The device is controlled by digital temperature control
technology, and it has a over temperature protection, the
safety temperature is 140
Press the temperature switch button, the characters in
temperature display area will be flashing, and then rotate
the parameter setting knob to set the target temperature,
press the parameter setting knob to turn on the setting.
Note:
•
Set the temperature via rotating the parameter setting
knob slowly to the target value.
•
When the heating function is switched on, the LED
displays the temperature value on the left-hand side.
•
The heating function is switched on or off by pushing
heating knob.
The instrument automatically displays the last running
speed and temperature parameters once turned on.
Generally, the LED screen cannot display the actual
temperature of sample in the vessel or dry bath surface,
temperature differences as following:
Dry bath center and outer edge.
The sample in the vessel and dry bath surface.
7.
Function: Timing
The device can work in accordance with the timing mode or
continuous operation mode.
Timing Mode: Press the time switch button, the characters
in time display area will be flashing, and then rotate the
parameter setting knob to set the target time, press the
parameter setting knob to turn on the setting.
During operation, motion can be stopped at any time by
pressing the speed/timer control knob. If the knob is
pressed again, motion will start again and the timer will
restart countdown. When the timer reaches zero, the unit
will be automatically halted.
Continuous Mode: Press the time switch button, the
characters in time display area will be flashing, make sure
the setting time is zero, press the parameter setting knob to
turn on the continuous operation mode.
