SCIFIT ISO10 R-BR Series, Machine User Manual

Page: 14 / 22

HUR-ERGOLINE
Connecting Port Location
The port connector is located in the front area of the right side cover.
Console Cable Connections
1. The HUR/ERGOLINE cables are labeled with a "COMM" decal. Connect the "COMM" labeled cable coming out of the machine
to the "COMM" labeled cable that is attached to a RJ45 female to female connector coming out of the back of the console.
2. Attach the "Non-labeled" cable coming out of the machine to "P6" on the back of the console.
3. After connecting the cables, attach the console to the machine with the provided securing hardware.
Page 12 of 20