User Manual SM6025
14
2.4.2 [SETUP]
When the LCR function is active, press this key-[SETUP], the following soft keys will be displayed in the
soft key zone on the LCR measurement setup page.
<MEAS SETUP>
<CORRECTION>
<LIMIT TABLE>
<LIST SETUP>
<FILE MANAGE>
2.4.3 [SYSTEM]
This key-[SYSTEM] is used to enter into the system setup page. The following soft keys will be available:
<SYSTEM SETUP>
<LAN SETUP>
<DEFAUKT SETTINGS>
<SYSTEM RESET>
2.5
Basic Operation
Basic operation of SM6025 is as follows:
Use menu keys ([MEAS], [SETUP], [SYSTEM]) and soft keys to select the desired page.
Use cursor keys ([
←
][
→
] [
↑
] [
↓
]) to move the cursor to the desired zone. When the cursor moves
to a specified zone, the zone will become reverse expression/ color and in the center.
The soft key functions corresponding to the current zone of the cursor will be displayed in the
soft key zone. Users can select and use the desired key. Numeric keys, [
←
] and [ENTER] are
used to input data. When a numeric key is pressed down, the usable unit soft key will be
displayed in the soft key zone. You can choose a unit soft key or press [ENTER] to end data
inputting. When [ENTER] is used to terminate data inputting, the unit of data will be set to a
default unit, such as Hz, V or A. For example, the default unit for frequency is Hz.
2.6
Start the instrument
Plug in 3-line power plug.
Caution !
Keep the power-supply voltage and frequency conform to above specifications. Power input
phase line L, zero line N, ground line E should be the same as that of the instrument. Press the power
switch at the left corner on the front panel and then a boot screen will appear which displays our company
logo, instrument model (SM6025), and the version number of the software (Ver 1.00).
