User Manual
D3304
PS
11
First Time Operation
Operation
Triple Output Voltage Operation :
PSD3304
Fig.1 Connection of PSD3304 for Triple Output Voltage Operation
After unpacking the instrument check for any mechanical damages. The
instrument should be plugged in mains-plug of proper mains supply 230 V ± 10%.
On switch ON no undue observation should be noticed. Once the instrument is
switched ON, the power ON is indicated by liting of displays.
The power supply has an electrically floating output . This permits easy series or
parallel connection with other power supply units, to increase supply voltage or
current respectively.
Figure below shows connection of
for Triple Output Voltage Operation
COM
Circuit under Test
+
+
+
30.0
V
2.00
Multiple Power Supply
3304
PSD
Coarse
V set
I set
A : 30V/2A
B : ±15V/1A
+
Fine
I set
+
Power
A
B
ON
OFF
I set
C : 5V/5A
A
+
C
+15V
-15V
V set
COM
4.5 V
5.5 V