WebSTAR DPC2223 and EPC2223 VoIP Cable Modem User’s Guide Preliminary Draft 02 – 1/26/06
34
Installation Diagram
The following diagram illustrates one of the various connection options that are
available to you.
To install the cable modem for telephone service
1. Connect a telephone, fax machine, or analog modem to each of the
appropriate RJ-11 ports on the cable modem.
Notes:
•
The cable modem provides one line of telephone service on each of the
RJ-11 connectors.
•
Service must be set up and enabled by the cable telephone service
provider.
•
The two center conductors (pins 3 and 4) on the RJ-11 connector
provide electrical connections to directly attached telephone devices or
to a permanently installed in-home telephone wiring network.
•
The telephone port labeled Line 1 also supports multi-line telephone
devices. Line 1 is supported on pins 3 and 4, and Line 2 is supported on
pins 2 and 5.
•
The use of telephones that require electrical connections to other RJ-11
pins requires an adapter.
2. After all telephone connections are complete, insert the AC power cord into
the power connector on the back of the cable modem, and then plug the cord
into an AC power source.
3. Connect the active RF coaxial cable to the
CABLE
connector on the back of
the cable modem. The cable modem begins an automatic search to locate
and sign on to the network that provides the telephone service. This process
may take up to 5 minutes. The modem will be ready for use when the
CABLE
light on the front panel stops blinking and illuminates continuously
Note:
Use an optional cable signal splitter to add a TV, a DHCT or set-top
converter, or a VCR.
