Scientific Atlanta Continuum DVP eXtra Dense QAM Array, System Manual

Page: 51 / 112

Installing and Removing SFP Laser Modules,
Continued
To install a SFP module into the XDQA Housing
When you have read the Important Safety Instructions earlier in this guide, you are
ready to install SFP modules into the XDQA Housing.
The following steps explain how to insert a SFP module into the housing.
1.
Unplug the power cord(s) from the power source(s) to turn off the XDQA
system.
2.
Slide the SFP module into the SFP housing located at the back of the XDQA
Housing.
Notes:
•
Before inserting a Cam Latch SFP laser module, close the latch, see picture
below.
•
When inserting a SFP module into a SFP housing, ensure you firmly press
the SFP module into the SFP housing. Gently pull on the SFP module to
confirm whether or not the module is locked into its housing.
FAN 3
10/100b
GbE 2
FA
GbE 1
B
ACK
UP
3. Plug the XDQA Housing power cord to the power source.
Continued on next page
4004949 Rev C Installation 2-15