Instructions for NTEP models
Instructions for NTEP models
Instructions for NTEP models
Instructions for NTEP models
17
Limited Warranty:
All Scientech Zeta Series Electronic Balances and their accessories are warranted against defects in materials and workmanship for five
(5) years from the date of shipment. During the warranty period, Scientech will repair, or at its option replace at no charge, components
that prove to be defective. The equipment must be returned, shipping prepaid, to Scientech's product service facility. This limited war-
ranty does not apply if the equipment is damaged by accident or misuse or as a result of service or modification by other than a Sci-
entech service facility. The foregoing warranty is in lieu of all other warranties expressed or implied including but not limited any im-
plied warranty of merchantability, fitness, or adequacy for any particular purpose or use. Scientech, Inc. shall not be liable for any spe-
cial incidental or consequential damages whether in contract, tort or otherwise.
Returned Goods Procedure:
Should it become necessary to return any item to Scientech for any reason, please contact our Product Service Department at (800) 525-
0522 or (303) 444-1361 or Fax (303) 444-9229 or E-mail [email protected]. When you contact us, please be ready to provide the
model number, serial number and a description of the problem. Frequently we can provide self-help information that will eliminate the
need for returning the unit.
If equipment return is required, please pack the items in the original box and packing material. As an alternate, place equipment in a
snug fitting box, then pack that box in a larger box with at least four inches of packing material between the two boxes. Scientech does
not assume responsibility for under packed items.
Please include the name and phone number of the person to contact regarding repair question(s).
Normally, products are repaired and shipped within 5 working days after their arrival at the product service facility. This is an average
time and could vary depending on the workload.
Shipping Address:
Scientech, Inc.
5649 Arapahoe Avenue
Boulder, CO 80303
U.S.A.
Disposal of Electrical and Electronic Equipment:
Scientech, Inc. recommends the following for disposal of electrical and electronic equipment:
1.
The best option is to reuse the equipment in its entirety.
2.
Where the equipment can not be reused in its entirety, priority should be given to reuse of its subassemblies and components.
Where reuse is not appropriate, electrical and electronic equipment, including batteries, should be recycled according to local ordinanc-
es. It should never be mixed with municipal waste.
Environmental Requirements:
This product is intended for indoor use at altitudes up to 2000 meters, Pollution Degree 1 or 2 in accordance with IEC 664 and transient
overvoltages according to Installation Categories (Overvoltage Categories) I, II and III. For mains supply, the minimum and normal
category is II.
CE Mark:
All Scientech Electronic Balances carry the CE Mark and conform to the requirements of the following standards:
EN 55011: 2009 + A1 :2010 (Class A, Group 1) Limits and Methods of Measurement of Radio Disturbance Characteristics
of Industrial, Scientific and Medical (ISM) Radio-frequency Equipment
EN 61326-1: 2013 EMC Requirements for Electrical Equipment for Measurement, Control and Laboratory Use
EN 61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use
