It takes about 30 seconds from power on to NDI working nomarly. It takes time for linux
system to start and please wait patiently.
3. Three ways to power on and connect to LAN
For NDI Studio 4K series, you can choose two power supply modes: DC input and POE
1. DC-12V Input
2. POE Power supplier
Power on with the SCIENCE IMAGE original standard 12V power supply
Power up through the network cable connecting the POE (power over Ethernet) with Gigabit network switch
PoE Power over Ethernet(802.11af/at) support
Always use a certified 802.11 af/at with minimum 10W port power capacity and it's a gigabit network switch.
Always use genuine SCIENCE IMAGE power adapters, 3rd party products perhaps can cause permanent
damage.
After startup, you will find that the character SCIENCE IMAGE Tech begins to appear on the OLED screen,
and the power light on the right starts to light up.
At this time, the device is powered up successfully.
4. OLED screen display instructions
In the coding status, the current status and parameters will be displayed alternately on lines 2, 3 and 4 of
the screen
05