During the upgrade, do not switch off the power supply or close the upgrade page. Otherwise,
system files may be damaged and the system may fail to start.
After the progress bar reaches 100%, the upgrade page is closed and the device restarts. Then, log in to the
WebUI again and check the firmware version to check whether the upgrade is successful.
Click "encoder" or "decoder" button to switch to the corresponding mode, the default encoder mode.
The first line of the OLED screen of the product will display the working mode, "NDI encoder"is the encoder,
and "NDI decoder" is the decoder,as shown in the figure below.
10.4 Working mode switch
16