2
1
Automatic mode (DHCP) needs to be used in the link connecting to the router. The router dynamically
assigns the IP address tothe device in real time. An IP address will be randomly assigned to the device
every time the power is turned on.You can log in to the webpage according to the IP address assigned by
the router and modify the corresponding information (if there is no IP address assigned by the router in
the link, the default IP of the device is 192.168.8.8). When the pattern is selectedThere is no need to fill in
the IP address information on the page, just click the "Apply" button below, and then the device willau-
tomatically restart and get the IP address assigned by the router in the link (this process is long)(30
seconds), to be displayed on the screen of the device after the newIP address in the browser input IP login
can be.
If this mode is selected, the user needs to set the IP address information of the device to be in the same
network segment as the IP address information of the local PC or mobile phone.For example: View the
local computer's Ethernet IPv4 information as "IP address: 192.168.1.144 Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1", then you can set the device IP address as: "IP address: 192.168.1.142 gate-
way : 192.168.1.1 Subnet mask: 255.255.255.0 "The gateway and subnet mask are the same as the local
computer or mobilephone, and the IP address does not conflict with other addresses in this network
segment
After filling in the IP address, click the [apply] button below, and then the system willcomplete the modifica-
tion of the IP address and automatically restart the equipment.The network page will also automatically
enter the modified IP address page (there isno need to enter the new IP again). This process takes about 30s.
There are two modes for device IP address setting: DHCP and manual.
1
2
7.1.1 DHCP mode
7.1.2 Manual mode
07