background image

31

Select a User Profile

Every workout is saved to a User Profile. Be sure to select the proper User Profile before starting a workout. The last User that 
completed a workout will be the default user.

User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more 

accurate calorie and heart rate information.

From the Power-Up Mode screen, push the Increase(

) or Decrease(

) buttons to select one of the User Profiles. The 

Console will display the name of the User Profile and the User Profile Icon. 

Edit User Profile

1.   From the Power-Up Mode screen, push the Increase(

) or Decrease(

) buttons to select one of the User Profiles.

2.   Push the OK button to select the User Profile.
3.   The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Profile 

option.

 

 To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up Mode 

screen.

4.   The Console display shows the NAME prompt and the current User Profile name. 

 Note:

 The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.

 

 The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank space 
(found between A and Z). To set each segment, use the Left(

) or Right(

) buttons to shift between segments

 

 Push the OK button to accept the displayed User name.

5.   To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease buttons to 

adjust, and push OK to set each entry.

6.   The Console display shows the SCAN prompt. This option controls how the workout values are displayed in the Lower 

Display during a workout. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other workout 
value channels when desired. The “ON” setting allows the Console to automatically display the workout value channels 
every 6 seconds. 

  

The default is “OFF”.

  

Push the OK button to set how the workout values are displayed. 

7.   The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings and 

/ or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option allows the 
Telemetry Heart Rate Receiver to be deactivated blocking the interference.

 

 The Upper Display shows the current value setting: “ON” or “OFF”. Push the Increase(

) or Decrease(

) buttons to 

change the value. 

  

The default is “ON”.

  

Push the OK button to set the Telemetry Heart Rate Receiver to active. 

8.   The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout Values 

are displayed during a workout

 

 The Lower Display will show all of the workout values, with the active Workout Value flashing. The Upper Display shows 
the active value setting: “ON” or “OFF”. Push the Increase(

) or Decrease(

) buttons to hide the active workout value, 

and push the Left(

) or Right(

) buttons to shift the active workout value. 

 

NOTE:

 to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.

 

When done with customizing the Lower Display, push the OK button to set it.

Summary of Contents for 470i

















































Reviews: