Page 16
6.
Installation
Step 3
Using a leveller, level the rangehood using
screws (
A
).
Once levelled, secure it firmly to the wall (
C
)
using the appropriate screws.
Step 4
Feed through and secure the flexi ducting from
the rangehood outlet to the Isodrive motor.
• The reducer is to be placed on top of the
200mm outlet on the rangehood when using
a 650 Isodrive motor only.
Step 5
Place flue covers onto the rangehood and adjust
the height of the flue covers by sliding the outer
flue cover down.
NOTE:
The outer flue cover section alone will
not cover the entirety of the control box and
PCB computer board.
A
C
Inner flue cover
Outer flue cover
Summary of Contents for WM-EX90S
Page 1: ...www schweigen com au RANGEHOOD INSTALLATION GUIDE WM EX90S Revision V3 01 10 21 ...
Page 25: ...Page 25 Notes ...
Page 26: ...Page 26 Notes ...
Page 27: ...Page 27 Notes ...
