Page 16
7. Installation
Flexible Ducting for Isodrive Motor System
For the Isodrive motor, please do not crush or kink flexi ducting, as it will reduce air flow and may
cause noise to occur through the system. Ducting needs to be kept taut at all times. Please refer to
the Isodrive motor installation guide for more details on flexi ducting with the silent system.
Single IsoDrive Motor Installation
*NOTE:
Isodrive motor DOES NOT include roof seal kit and support straps. Weather shield only
available for Isodrive 1600 motor, please attach it the motor
1
.
Isodrive Motor
1
Roof Seal Kit (Dektite)*
Support Straps*
Motor Power Lead (Male Plug)
Rangehood to Motor Lead
(Female Plug)
Attach Flexi Duct to Bell-Mouth
Adaptor using aluminium foil
tape or cable tie etc. Please
DO
NOT
rip the ducting.
2
3
5
6
4
1
2
3
4
5
6
7
8
9
10
Main Power Lead (Male Plug)
Multi-fit Y Joint, cut to 200 x
200 x 200mm
Flexi Ducting must be pulled
taut.
DO NOT
crush or kink
the ducting.
Connect flexi ducting to the
outlet on rangehood using
aluminium foil tape or cable tie.
Please
DO NOT
rip the ducting.
8
7
9
10
This picture is for illustrative purposes only, not to scale.
200mm
Flexi Duct
200mm
Flexi Duct
