Page 14
7. Installation
Ceiling Cassette Installation Guide
•
To install the rangehood to the ceiling, there needs to be a section on the ceiling that corresponds
to the sizes given in the technical drawing with support for the rangehood frame.
• Open the split-extraction sheet of the device and remove the filter before installing
•
The external motor system with the rangehood can be connected at this stage or after the
rangehood has been secured.
•
Place the rangehood in the section determined by the ceiling mounts and secure by screws into
the rangehood mounting holes.
NOTE:
Please make sure that all plastic protection on the rangehood and filters are removed before use.
DANGER
Always switch off and
disconnect power before
installing the rangehood.
Failure to do so may
cause serious injury.
4
6
8
Cassette Rangehood
Mounting Holes
Cover Plate
Beam
Inside View
