Schweigen Endline Isodrive 1350 Installation Manual Download Page 4

Page 4

2. Your Safety

This appliance is not intended for use by person/s 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and/
or knowledge. Unless the person has been given 
supervision or instruction concerning the use of the 
appliance by a person responsible for their safety. 
Children should be supervised to ensure that they do 
not play with the appliance, it is not a toy.

Do not install Isodrive motor to a non-Schweigen 
and/or non-silent rangehood. If you fail to do so, your 
warranty will be voided.

The manufacturer declines all responsibility in case of 
failure to adopt proper safety measures.

Ensure that the location in which this appliance is 
installed, has good and permanent ventilation.

Please consult local laws and regulations and install 
in accordance.

Use an electrical connector with earth that is correct 
for your location.

Check that the voltage in your area corresponds to 
the appliance as indicated on the rating label.

Before Installation

We recommend this appliance to be installed or 
repaired by a qualified Schweigen Home Appliances 
technician. 

Please see our website 

www.schweigen.com.au

 

for recommended installers.

It is dangerous to modify any part of this appliance. 
Modification of any kind, will immediately void the 
warranty.

Electrical Cord

Ensure the supply cord is not exposed to heat, 
chemicals or sharp objects. If the supply cord is 
damaged, it must be replaced by the manufacturer, 
service agent or a similarly qualified person in order 
to avoid a hazard. The power supply cord connection 

MUST BE

 installed in such a way that access is easy 

in case of emergency.

RECEIVING YOUR ISODRIVE MOTOR

Please read this section thoroughly before attempting to operate the appliance. 
Inspect your product upon receipt. 

Any damage or defects MUST be reported 

within 48 hours, or no claim will be recognised.

DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED.

If this product is installed damaged, the supplier, nor the retailer, will be responsible 
for the costs associated with the repair, replacement, removal or re-installation of 
the appliances.

Summary of Contents for Endline Isodrive 1350





















Reviews: