EN
Floor grinding machine DSM 450
1 Important notes
15
1 Important notes
The machine may be used only with the accesso-
ries supplied by the manufacturer for stripping,
wet grinding, and dry grinding of even, level floor
surfaces such as:
cement
screeds
synthetic resin screed / asphalt
natural stone floors
remnants of adhesive or filling compound
floor remnants (e.g. foam backing)
Any other use of the machine can lead to dange-
rous situations and is prohibited!
To ensure correct use of the machine, follow the in-
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the ope-
rating personnel must carefully
read and understand this operating
manual!
Keep this operating manual close
at hand for easy reference!
Read and observe documents and
operating manuals provided by sup-
pliers!
If the machine is on loan to other parties, the
operating manual needs to be provided with the
machine and its importance must be made clear!
1.1 Symbols used
The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Additional information
This symbol indicates additional information.
1.2 Liability and warranty
©
Schwamborn Gerätebau GmbH
All rights, including those pertaining to transla-
tion, lie with Schwamborn Gerätebau GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty is excluded if:
The instructions in the operating manual have not
been observed.
The machine or its attachments were improperly
operated.
The maintenance was carried out inadequately or
incorrectly.
Specified spare parts were not used.
The protective equipment was not used, has been
altered or was removed.
The specified power supply ratings and surroun-
ding conditions have not been observed.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma-
chine without the manufacturer s permission. Any
such actions will also void the warranty.
2 Safety
This chapter contains a summary of the most impor-
tant information on safety when handling the ma-
chine.
2.1 Accident prevention and safety
The following instructions comply with legisla-
tion, directives, and publications including:
EC Machinery Directive
EC General Product Safety Directive
Law governing technical materials
Law governing equipment safety
Law governing product liability
This operating manual is intended for operators and
tool setters, as well as for the personnel that service,
maintain and repair the machine. Together with all the
technical documentation, it is intended to help
avoid hazardous situations
use the machine for its intended applications
avoid downtime and repair costs
maintain the function of the machine
extend the service life of the machine.
The manufacturer and owner of the machine must
respect the contents and regulations of the EC directi-
ves. The effectiveness of any measure ultimately de-
pends on how well all parties, i.e. the manufacturer,
the owner and the machine operators, work together
to uphold safety standards.
Warning
Prohibitio
n
Direction
