7
4. RESET NETWORK CONFIGURATION
In order to reset the network connection settings to factory defaults, please follow next steps:
1. Press back button 3 times
2. During the operation, LED will blink red 5 times per second
Reset of network connection settings is followed by reset of the gateway device. If ethernet cable is connected to the gateway
during boot process, gateway will automatically connect to the home network router via ethernet cable. Otherwise, the gate-
way will start operating in AP mode as ex- plained in Section 3.1.
5. RESET USER PREFERENCES
This function allows user to reset all user settings ( device information, network configuration, scenes, etc.).
In order to reset user preferences, please follow next steps:
1. Press back button 6 times
2. During the operation, LED will blink red 2 times per second
6. FACTORY RESET
In order to restore your gateway to default factory setting, please follow next steps:
1. Press back button 9 times
2. During the operation, LED will blink red once per second.
7. BUTTONS/FUNCTIONS
Button
Button Operation
Action
LED indication
FRONT
2 x short press
Open network for device inclusion
Blink blue 1x per second
2 x short press
Close network
Light green
4 x short press
Device exclusion
Blink blue 5x per second
BACK
3 x short press
Network reset
Blink red 5x per second
6 x short press
Reset user preferences
Blink red 2x per second
9 x short press
Factory reset
Blink red 1x per second
long press 5 seconds
Reboot of the gateway
Blink red for 5 seconds
Normal mode
Light green
No network
Blink blue 5x per second
System error
Light purple
AP mode
Blink blue 1x per second
