Schwaiger DSR 6005T User Manual Download Page 35

GB

To view the "Total List", press the OK button while  watching 
TV  or  listening to the radio.
Three colored buttons are used to manage the Channel List.

Press OK to display the "Total List" or any Favorite Channel List. 
Select the channel using the        and        buttons on the remote 
control or on the receiver. 
Press the INFO button.
Right in the picture a list with all technical data appears to the 
selected program.

7. Selecting TV and Radio Channels

Press the OK button and select a channel from the channel list that appears and using the        and        
buttons on the remote control or on the receiver.Then press the OK button.
Select the channel using the numeric buttons.
Select the channel using the       buttons on the remote control or on the receiver.

7.1 Info Box

Your selected channel appears on the TV screen, along with the 
"Info Box" at the bottom of the screen that will be visible for a few 
second. Display time of the "Info Box" can be set to 2, 4, 6 or 8 
seconds (menu 12. "Banner Timeout" in "General Settings" menu).
To recall this "Info Box" please press the blue INFO button on the 
remote control, and press EXIT to cancel it. 

 

The Info Box displays information such as the titles of the 
current and next programs as well as the reception quality and 
signal strength. For more detailed information about the current 
program press the INFO button again.

You can display all available channel information and multiplex 
information on any desired TV or radio channel.

7.2 Channel List and Channels Sort 

Digital TV offers numerous channels. Therefore, all available 
channels are managed in lists.

RED Button:

You can navigate to your own channel list(s) with the RED 
button if you have created such personal lists (see below:" 
Favorite Lists").

GREEN Button:

Alternatively, you can add or delete channels from the 
"Favorite Lists" (A ~ E), using the GREEN button. 
Its changing function is indicated in the bottom line of the lists.

YELLOW Button 

You can sort the channels with the YELLOW button by these 
types:  

- Channel names alphabetical (A-Z)
- Free to Air channels and Pay TV
- Freely accessible and individually protected channels

Please note that a certain customized order (different from the ones mentioned above) cannot be 
restored after regrouping.

The following steps will explain how to view a channel that has been found by "Automatic Search" or 
"Manual Search" already before. To select the channel you want to watch, use one of the following methods.

Summary of Contents for DSR 6005T
















































Reviews: