schwa-medico SPORECUP XTR2, Operating Manual

Page: 7 / 24

7
English
Pulse forms
with 1 k Ω load real with ANSI/AAMI standard load
change in output current
depending on load
Operating the SPORÉCUP XTR2
Connecting cables and electrodes
»
Connect the electrodes with the cable(s) (always 2 electrodes per cable).
»
Connect the cable(s) to the XTR2 (no. 6).
»
Place the electrodes on the desired area (see examples on chapter Electrode
Placement).
Switching-ON the XTR2
»
Switch the commutator (no. 8) to the ON position.
»
Switch on the stimulator by pressing the key (no. 5). The program shown on
the display is the last which was used during the previous session.
If the display shows a key symbol on the upper left side, the XTR2 has previously
locked a specific program (see chapter locking the key pad).
Selecting a program
Select a program by pressing the key. To scroll
through the programs, press the key as often
as necessary until you have selected the program
of your choice. To return to the previous program,
press the left keys. Selecting a program is only
possible if the keypad has not been locked on one
specific program (see chapter locking the key pad).
500 1000 1500 2000
20
40
60
80
2500
Strom I
mA
Widerstand R
L
Ω
current
mA
resistance
Ω
voltage
time
current
time
current,
voltage
time