SCHUSTER SWG User'S Operation Instruction Download Page 2

2

SAFETY WARNINGS

CAUTION!

The appliance may only be used by adults after reading the installation and servicing 

manual thoroughly.

Children must be supervised to prevent them from playing or tampering with the 

appliance
CAUTION!

The appliance must be installed, adjusted and maintained by professionally qualified 

personnel, in compliance with the standards and provisions in force. Incorrect instal-

lation can cause damage to persons, animals and objects for which the manufacturer 

cannot be held responsible.
DANGER!

NEVER attempt performing maintenance or repairs on the appliance on your own 

initiative. 

Any work must be done by professionally qualified personnel. We recommend stip

-

ulating a maintenance contract.

Insufficient or irregular maintenance can jeopardise the operating safety of the appli

-

ance and cause damage to persons, animals and objects for which the manufacturer 

cannot be held responsible.
ATTENTION! 

Changes to the parts connected to the boiler (once the boiler installation is complete) 

Do not modify the following parts: 

-  the boiler 

-  the gas, air, water and electricity supply lines 

-  the flue gas pipe, the safety valve and the exhaust pipe

-  the construction parts which affect the operating safety of the appliance.
ATTENTION!

To tighten or loosen the screwed fittings, use only appropriate fixed spanners.

Non-compliant use and/or inappropriate tools can cause damage (e.g. water or gas 

leakage).
ATTENTION!

Indications for propane gas-fired appliances 

Make sure that the gas tank has been deaerated before installing the appliance. 

For state-of-the-art tank venting, contact the LPG supplier or person qualified in 

compliance with the law requirement. 

If the tank has not been professionally deaerated, ignition problems could arise. 

In that case, contact the supplier of the LPG tank.
DANGER! Smell of gas

Should a smell of gas be perceived, follow these safety guidelines: 

-   do not turn electric switches on or off 

-   do not smoke 

-   do not use the telephone 

-   close the gas shut-off valve 

-   air out the area where the gas leakage has occurred 

-   inform the gas supplier or a company specialised in installation and maintenance 

of heating systems.

DANGER! Explosive and easily flammable substances

Do not use or store explosive or easily flammable materials (e.g. petrol, paints, paper) 

in the room where the appliance is installed.

DANGER! 

Do not use the appliance as a supporting base for objects.

In particular, do not place receptacles containing liquids (Bottles, Glasses, Jars or 

Detergents) on top of the appliance.

If the appliance is installed inside a housing, do not insert or rest other objects inside 

this housing. 

Summary of Contents for SWG









Reviews: