schupp OPAL 136435, Instructions For Use Manual, Page: 9 / 28

220822

SCHUPP GmbH & Co KG
72280 Dornstetten-Aach | Glattal Straße 78 | T: +49 (0) 7443/243-0 | F: +49 (0) 7443/243-255 | info@schupp-gmbh.de | www.schupp.shop
9 OPAL FUNCTION
6.0 Function and operation
6.1 Set-up and installation
Place the therapy couch at the desired treatment location and remove the protective foil from the couch. Do not use a
cutter, knife or similar pointed tools for this. The upholstery could be damaged.
The packaging is made of environmentally friendly and recyclable materials and can be disposed of properly at a
collection point. Also note when setting up:

Carry the couch only by the lower metal frame, under no circumstances use the railing / all-round switch bar, head
section or arm sections as a carrying handle!

Remove the transport securing strap under the head section and in the frame before commissioning!

Couch can be positioned in the room via activated wheel frame! Then retract the wheels again. The couch must
stand firmly on the floor for use!

Note the width of the couch - Do not push the couch against a door frame! Upholstery can burst open!
The stability in case of small unevenness in the floor can be
improved by unscrewing the level adjustment at the feet of
the couch frame.

In the case of an energetically operated therapy couch, it should be positioned near a power socket!

Lay the mains cable in such a way that there is no danger, use cable bridges if necessary!

Check whether the operating voltage of the therapy couch (label) corresponds to the mains voltage!
The therapy couch is immediately ready for operation after connection to the mains voltage.
6.2 Height adjustment with lifting cylinder
The height is adjusted by means of a lifting cylinder via a foot pedal on both sides of the couch.
To raise or lower the lying surface, press the foot pedal
down or up and then release the pedal.
Repeat this until the lying surface is in the position you
desire.
In the upper end position, the pedal can be depressed freely.
Damage to the lifting cylinder cannot occur. In the lower end
position, the movement stops automatically.
► Please inform patient beforehand and secure against slipping if necessary!
► The patient must always keep his limbs on the upholstered surfaces of the couch!
► Moving parts - Do not use the pedals of the lifting cylinder as a step or climbing aid!
Warning .
► The adjustment of the lying surface can and may be carried out under load!
When lowering the pad (without patient) from the highest position, additional pressure can initially be applied to
the pad with the hand in order to initiate the lowering process more quickly!