Function
30
02.00 | NST3 | VERO-S quick-change pallet system | en | 1344366
high precision. If no clamping pallet is used in the clamping station,
the clamping slides of the quick-change pallet modules move to
the closed position. Exchanging the clamping pallet is not possible
with clamping modules that are not locked.
WARNING
Risk of injury due to tombstone or clamping pallet falling from
the clamping station if the unlocking connection is not
pressurized according to schedule.
•
The unlocking connection may only be operated if the
tombstone or clamping pallet has been prevented from
falling.
•
On production machines with a swivel function, the clamping
station always swings back into set-up position.
5.3 TURBO connection
The clamping stations are equipped with an additional turbo
connection. When compressed air is applied at the connection for
the turbo function, this function actively provides air pressure to
support the spring-actuated locking procedure of the quick-change
pallet module. This increases the pull-down force in all the
modules.
One pressure pulse is sufficient to increase the pull-down force
until the maximum permissible value is reached. Afterwards, the
clamping station can be switched back to depressurized. The pull-
in force is retained due to the self-locking function of the spring-
loaded system.
Summary of Contents for VERO-S NST3 400-250
Page 43: ......
