Assembly
18
02.00 | NST3 | VERO-S quick-change pallet system | en | 1344366
4.2 Aligning the clamping station
4.2.1 Alignment using T-nuts
The clamping station can be aligned with loose T-nuts along an
aligning groove on the machine table. At least two T-nuts offset
lengthwise are provided and their size is matched to the aligning
groove on the machine table. The T-nuts are not included in the
scope of delivery of the clamping station.
Alignment using T-nuts
4.2.2 Alignment using alignment elements
The clamping station can be mounted on the machine table via a
centering pin for the center bore. The clamping station is aligned
at an angle in a suitable alignment hole or alignment groove of the
machine table via an adjustment pin, an adjustment pin with
alignment width or a T-slot, and all six degrees of freedom are
completely fixed. The alignment elements are not included in the
scope of delivery of the clamping station.
Centering
Reference B
Alignment Reference C
Alignment via alignment elements
Summary of Contents for VERO-S NST3 400-250
Page 43: ......
