Clamping pins SPA 40, SPB 40, SPC 40, SPG 40
Type B clamping pin, with positioning in one direction
Type A clamping pin, with positioning in two directions
Type C clamping pin, without positioning, with centering clearance of
0.1 mm
Indexing pin for position orientation and torque transmission with torque pin.
Positioning in one direction
Positioning direction, perpendicular to the positioning axis
Select the positioning axis with the greatest possible distance
1 clamping area
3 clamping areas
2 clamping areas
4 clamping areas
6 clamping areas
6.1 Notes on clamping pin SPG 40
The SPG 40 can be used at a clamping area instead of the SPA 40.
The repeat accuracy increases to < 0.002 mm when using the SPG
40.
When fitting the screws from above, an M12 screw that is 10 mm
longer of strength class 12.9 must be used according to the left
mounting option in the illustration "Fastening the clamping pins".
33
05.00 | NSE-A3 | VERO-S quick-change pallet system | en | 1376941
