SCHUNK VERO-S NSE plus 100-75, Translation Of Original Operating Manual

Page: 35 / 68

Assembly
04.00|NSE plus, NSL plus, NSD plus |en 35
NSL plus 150 / NSD plus 150
Mounting using the two BRR 50 cylindrical clamp blanks supplied
(see Fig. "Clamping diagram"
(

4.4, Page 34) ). There are slots on
the bottom of the clamping stations to mount T-nuts in order to
align the clamping stations to the machine table slots.
The NSL plus 150 and NSD plus 150 each have a G 1/8" air
connection.
A plug-in connection for nominal hose width 4 mm is contained in
the scope of delivery of the NSL plus 150 and NSD plus 150. The
NSL plus 150 clamping station can be retrofitted at the air connec-
tion with a separately available connecting strip (chapter "connect-
ing strip"
(

4.6.2, Page 50) ) to increase the accessibility of the
connection points.
With the NSD plus 150, it is possible to use single clamping pallets
on by installing a dome-shaped centering bushing ZKA 12.
Left: NSL plus 150, right: NSD plus 150
4.4.1