SCHUNK VERO-S NSE plus 100-75, Translation Of Original Operating Manual

Page: 42 / 68

Assembly
42 04.00|NSE plus, NSL plus, NSD plus |en
NSL plus 600
Mounting using the six BRR 50 cylindrical clamp blanks supplied
(see Fig. "Clamping diagram"
(

4.4, Page 34) ). There are slots on
the bottom of the NSL plus 600 clamping station to mount T-nuts
in order to align the clamping stations to the machine table slots.
The NSL plus 600 is equipped with two interconnected G 1/8" air
connections for simultaneously unlocking all six clamping points.
The air supply can either be connected on the front or the back of
the clamping station, while the opposing connecting point remains
closed with a locking screw.
A pneumatic plug-in connection for nominal hose width 6 mm and
a sealing nipple are contained in the scope of delivery. The sealing
nipple is compatible with common locking couplings: NW 7.4.
The right sealing coupling is available as an accessory. The clamp-
ing station can be retrofitted with a separately available connect-
ing strip (chapter "connecting strip"
(

4.6.2, Page 50) ) to increase
the accessibility of the connection point.
4.4.6