Maintenance and care
8.3 TOOLFIX MONO or VARIO tool adapter – ISO ( SK/BTCat ) /
HSK ( A+B ) / VDI
Monthly: Visual inspection and cleaning of the quick-change
interface (1)
Clean and inspect the quick-change interface (1) of the tool
adapter. In case of damage or heavy wear, the interface must be
replaced (only necessary for adapters of the VARIO series).
Monthly: Cleaning and visual inspection of the toolholder
mounting interface (2)
Clean and inspect the toolholder mounting
interface and associated alignment elements. In case of damage or
heavy wear, the components must be replaced.
Monthly: Functional check of the tool locking mechanism (3)
To check the function, pull the tool locking mechanism (3) several
times to the rear and front end positions and release it. It must be
possible to pull the pin completely out of the toolholder mounting
interface (2). After releasing, the pin must snap automatically to
the inner end position and must not rebound from this position.
The pin must remain axially free from play in the inner end
position. It must be possible to pull the pin with two fingers
(smoothly).
Monthly: Functional check of the torque pin
Perform a test clamping to ensure that the torque pins at the
lower end of the shaft engage securely in the toolholder mounting.
35
01.00 | | TOOLFIX modular tool mounting device | en | 1510829