SCHUNK TCU-P 050-MV, Assembly And Operating Manual

Page: 20 / 32

Assembly
20
03.00 | TCU-P | Assembly and Operating Manual | en | 389462
4.3 Air connection
NOTICE
Damage to the gripper is possible!
If the maximum permissible finger weight or the permissible
mass moment of inertia of the fingers is exceeded, the gripper
can be damaged.
•
A jaw movement always has to be without jerks and bounce.
•
You must therefore implement sufficient reduction and/or
damping.
•
Observe the diagrams and information in the catalog data
sheet.
NOTICE
Observe the requirements for the air supply
Technical data [
}
15].
Air connection
Item 64 80 100 125 160 200 240
Pressure medium Compressed air
Standard for quality of the
compressed air According to DIN ISO 8573: 6 4 4
Hose connection Connect pressure line to the air connection.
Thread diameter hose connection
(A= unlocked, B= locked) M3 M5 G1/8
• Open only the air connections that are needed.
• Close unused main air connections using the screw plugs from
the enclosed pack.
• For a hose-free direction connection, use the O-rings from the
enclosed pack.