Basic safety notes
03.00 | Clamping Device SVP-2 | Assembly and Operting Manual | en | 0289021
9
2.9 Fundamental dangers
2.9.1 Protection during handling and assembly
Incorrect handling and assembly
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Have all work carried out by appropriately qualified personnel.
• For all work, secure the product against accidental operation.
• Observe the relevant accident prevention rules.
• Use suitable assembly and transport equipment and take
precautions to prevent jamming and crushing.
Incorrect lifting of loads
Falling loads may cause serious injuries and even death.
• Stand clear of suspended loads and do not step into their
swiveling range.
• Never move loads without supervision.
• Do not leave suspended loads unattended.
2.10 Notes on particular risks
WARNING
Risk of injury due to lateral under high pressure escaping oil!
Lateral under high pressure escaping oil on seals or by opening
the vent screw can cause serious injuries.
•
Wear protective gloves and safety goggles.
CAUTION
Material damage due to incorrect insertion of the toolholder /
reduction insert!
The gripping force of the TRIBOS clamping device SVP-2 goes up
to 800 000 N!
Incorrect insertion and positioning of the toolholder causes
plastically deformation and loss of function of the toolholder.
•
Insert the toolholder till the stop into the reduction insert and
position correctly (via the flattened areas).
•
Insert the reduction insert till the stop into the clamping
device.
