Translation of original declaration of incorporation
28
03.00|ROTA TPS-K, ROTA TPS-Z |en
Translation of original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that the following product:
Product designation:
Stationary 3-jaw chuck ROTA TPS-K, ROTA TPS-Z
ID number
0816127, 0816126, 0816137, 0816136, 0816147, 0816146,
0816157, 0816156, 0816167, 0816166, 88000779, 88000785
meets the applicable basic requirements of the
Machinery Directive (2006/42/EC).
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
DIN EN 1550
Machine-tools safety
–
Safety requirements for the design and
constructions of workholding chucks
DIN 55028
Machine-tools
–
holding fixtures for clamping devices
The manufacturer agrees to forward on demand the special technical documents for the
partly completed machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the partly
completed machine have been created.
Person responsible for documentation: Mr. Alexander Koch, Adress: see adress of the
manufacturer
Mengen, February 2018
p.p. Alexander Koch; Director for Development / Design
11