Basic safety notes
14
03.00|ROTA TPS-K, ROTA TPS-Z |en
DANGER
Possible risk of fatal injury to operating personnel if a jaw
breaks or if the lathe chuck fails because the technical data have
been exceeded and a workpiece is released or parts fly off
•
The technical data specified by the manufacturer for using the
lathe chuck must never be exceeded.
•
The lathe chuck may only be used on machines and facilities
that fulfill the minimum requirements of the EC Machinery
Directive; specifically, they must have effective technical
measures to protect against possible mechanical hazards.
WARNING
Risk of injury due to dropping the chuck during transport,
installation or removal.
•
Take special care in the danger zone when transporting,
installing or removing the chuck.
•
Note the relevant load securing regulations for working safely
with cranes, ground conveyors, lifting gear and load-handling
equipment.
CAUTION
Danger of slipping and falling in case of dirty environment
where the chuck is used (e.g. by cooling lubricants or oil).
•
Ensure that the working environment is clean before starting
assembly and installation work.
•
Wear suitable safety shoes.
•
Follow the safety and accident-prevention regulations when
operating the chuck, especially when working with machine
tools and other technical equipment.