Technical data
18
05.00|0889002_ROTA-S plus 2.0 |en
The speed of rotation must be reduced for jaws with a higher
weight!
Max. oscillating circle
–
With type SFG base jaws
ROTA-S plus 2.0
160-42
200-52
250-62
315-92
Oscillating circle Ø
208.5
264
323
401.5
At the rated speed the chucks are balanced to Q 6.3
Warranty and maximum clamping cycles
Length of warranty
60 months
Maximum clamping cycle number
50,000 cycles
Clamping force / speed diagrams
Clamping force/RPM curves have been determined by using hard
jaws. In the determination process, the maximum actuating force
was applied and the jaws were set flush with the outer diameter of
the chuck.
The chuck is in perfect condition and lubricated with SCHUNK
LINOMAX plus special grease.
If one or more of these prerequisites is modified, the graphs will
no longer be valid.
Chuck setup for clamping force/RPM graph
F
spB
Jaw clamping force
S
Center of gravity
F
s
Center of gravity radius
a
max
Max. jaw eccentricity of
center of gravity in axial
direction
F
max
Max. actuating force
6.2
