Assembly
02.00|PZH-plus 020-075|en
31
1 Press the "Teach" button (4) for 5 seconds.
LED 1 (3) flashes from 2nd to 5th second.
LED 1 goes off after 5 sec.
2 Release the "Teach" button.
3 Move the gripper to the "switch-off point for switching point 1"
position.
4 Briefly press the "Teach" button (4). LED 1 (3) flashes twice.
5 Move the gripper to the "switch-off point for switching point 2"
position.
6 Briefly press the "Teach" button (4).
LED 2 (5) flashes twice.
The assembly of the MMS-P sensor is completed.
