Assembly
04.00 | PGM 29 - 140 | Assembly and Operating Manual | en | 389284
17
NOTE
Ferromagnetic material changes the switching positions of the
sensor (e.g. Adapter plate made of ordinary steel).
For ferromagnetic adapter plates:
• The module must be first mounted on the adapter plate.
• Then, the position of the magnetic switchs has to be set.
Ø
Slide or turn in the magnetic switch (1) into the groove until it
bears against the stop (2) (if available).
Ø
If there is no terminal stop, then slide the magnetic switch
according to dimension l2 (bottom edge of gripper up to front
side of sensor) or according to dimension l1 (bottom edge of
gripper up to double arrow on sensor) and then clamp with the
mounting screw.
Type
Maß l
1
Maß l
2
PGM 60
23.9
32.8
PGM 82
21.3
30.2
PGM 96
27.4
36.3
PGM 120
26.9
35.8
PGM 140
34.2
43.1
