Assembly
08.00 | PFH 150- 300 | Assembly and Operating Manual | en | 389270
25
Mounting of the
proximity switch
Mounting kit for proximity switch IN 80
Gripper open:
Ø
Put the Gripper into "open" position.
Ø
Install the switch cam (91) in the base jaw by screwing in the
screw (100).
Ø
Bolt together the T-Nut (90) with the bracket (92).
Ø
Push the T-Nut with the bracket into the groove of the housing.
Ø
Push the proximity switch (1) to the stop in the bracket (92).
Ø
Push the Proximity switch (incl. Bracket and T-Nut) towards the
center of the gripper, as seen from the front of the gripper until
the proximity switch actuates.
Ø
By tightening the screw (101) fix the proximity switch in this
position.
Ø
Test the function by closing and opening the gripper.
Gripper closed:
Ø
Put the Gripper into "closed" position.
Ø
Install the switch cam (91) in the base jaw by screwing in the
screw (100).
Ø
Bolt together the T-Nut (90) with the bracket (92).
Ø
Push the T-Nut with the bracket into the groove of the housing.
Ø
Push the proximity switch (1) to the stop in the bracket (92).
Ø
Push the Proximity switch (incl. Bracket and T-Nut) outwards as
seen from the centre of the gripper until the proximity switch
actuates.
Ø
By tightening the screw (101) fix the proximity switch in this
position.
Ø
Test the function by opening and closing the gripper.
