Assembly
38
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
. Tighten the mounting screws
crosswise with a torque wrench.
CAUTION
Clamping pallets with centering sleeve that are suitable for NSL
turn-Z may not have a through-hole center bore. Protect the
taper connection against penetrating dirt.
CAUTION
To protect the quick-change pallet modules, the clamping pallet
must cover them completely.
Clamping pallet setup
NSL3 turn-Z in loading position
NSL3 turn-Z in loading position
1
Clamping pallet with manual lathe
chuck
5
Locking coupling <--> on unlocking
connection, clamping modules unlocked
2
VERO-S clamping pins
6
Centering taper, flexible
3
Machine table
7
Centering
4
Aligning the centering pins to the
clamping station
4.7
