General
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
9
–
NSL3 turn 570-5-Z
–
1 flexible centering taper fitted in the turning center.
The flex cone corresponds to the clamping pallet with
centering sleeve.
–
Accessory pack
1 centering pin Ø 50 mm (tolerance class g6),
2 guide pins for groove 14,
12 screws DIN ISO 4762 M12 x 50 mm,
12 nuts for T-slot DIN 508 M12 x 14,
1 locking coupling G1/8",
4 eye bolts M12 DIN 580,
1 eye bolt M16 DIN 580
•
Assembly and Operating Manual
Accessories
(see catalog or data sheets when ordering separately)
•
Clamping pallets with a centering sleeve configured for this
clamping station, type PAL turn 450-3-Z, PAL turn 570-5-Z
•
Clamping pin types SPA, SPB, SPC
•
Protection cover type SDE
•
Flexible centering taper
•
Centering sleeve suitable for flexible centering taper
•
Suitable screw-joint components
•
Suitable guide pins for alignment
•
Manual lathe chuck
•
Chuck jaws for manual lathe chuck
1.5
