SCHUNK LPE 100, Assembly And Operating Manual

Page: 10 / 24

Basic safety notes
10 01.03/LPE/en

Only employ trained personnel who have been shown how to
perform the work activities. If necessary, make use of the
manufacturer’s training programmes.

Personnel requiring training and instruction or those who are
already receiving training and instruction must be supervised
on the unit by skilled personnel.

Define areas of responsibility of the personnel. Enable
personnel to refuse instructions issued by third parties which
breach safety regulations.
2.3.2 Organizational measures

Ensure that at least one copy of this manual is kept in the
direct vicinity of the machine/system where the unit is
installed, and that it is accessible for the relevant persons.

Ensure that personnel have read and understood this manual,
especially chapter 2 "Basic safety notes".

Provide instruction about and observe the safety and
accident-prevention regulations valid at the usage site.

Provide instruction about and observe the environmental
protection regulations valid at the usage site.

Ensure that the safety and hazard warning signs on the
machine/system are observed and that the signs are clearly
legible.

Provide protective equipment.

Check the personnel’s conduct regarding awareness of safety
and hazards from time to time.
2.3.3 Disposal

Send unit components for recycling or properly dispose of
them according to local regulations.