Basic safety notes
03.01|LGP 08 - 40|en
7
Basic safety notes
Intended use
The module was designed to grip and to temporarily and securely
hold workpieces and objects.
The module is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The module may be used only in the context of its defined applica-
tion parameters
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Not intended use
It is not an intended use if the module is used, for example, as a
pressing tool, stamping tool, lifting gear, guide for tools, cutting
tool, clamping device or a drilling tool.
Environmental and operating conditions
•
Make sure that the module and the top jaws are a sufficient
size for the application.
•
Ensure that the environment is clean. Observe the mainten-
ance and lubrication intervals. Link Wartungs- und Schmierin-
tervalle
•
Make sure that the environment is free from splash water and
vapors as well as from abrasion or processing dust. This ex-
cludes modules that are designed specially for contaminated
environments.
2
2.1
2.2
2.3
Summary of Contents for LGP 08 - 40
Page 24: ...24 03 01 LGP 08 40 en...
