SCHUNK LDN-DG-0600, Assembly And Operating Manual

Page: 98 / 146

Assembly
96 04.00|LDN |en
The values relate to the entire bolting surface.
Requirements for levelness of the bolting surface (Dimensions in mm)
Diameter Permissible unevenness
< 100 < 0.02
> 100 < 0.05
The unit can be screwed to both the end plates and/or to the slide
and fixed with a centering sleeve.
Mechanical connection of the baseplate
1 Adapter plates or consoles
2 Centering sleeves 9 mm
3 Screws M6 ISO 4762
(Tightening torque: 10 Nm)
Check the evenness
of the bolting surface
Assembly