SCHUNK LDN-DG-0600, Assembly And Operating Manual

Page: 114 / 146

Maintenance and repair work
112 04.00|LDN |en
changing the motor housing
Uninstalling the motor housing
1 Disassemble the protective conductor and motor cable.
2 Remove the screws (1).
3 Using lifting screws M6x35 ISO4762 (2), lift the motor housing (3)
to bridge the magnetic force.
4 Completely remove the motor housing (3).
Installing the motor housing
1 Fit the lifting screws (2). (Let them protrude 5 mm)
2 Place the motor housing (3) on the guide rail.
3 Slowly unscrew the lifting screws (2) one by one and set the
motor housing onto the guided slide (6).
4 Fit the 4 screws (1).
5 Connect the protective conductor.
6 Connect the motor cable.
10.2.1
10.2.2