SCHUNK JGP, Assembly And Operating Manual

Page: 26 / 60

Assembly
26
14.00 | JGP | Assembly and Operating Manual | en | 389157
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [
}
26].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.3.1 Overview of sensors
Designation
JGP
40 50 64 80 100 125 160 200 240 300
Magnetic switch MMS 22 X X X X X X X X X X
Programmable magnetic
switch MMS 22-PI1 X X X X X X X X X
Programmable magnetic
switch MMS 22-PI2 X X X X X X
Programmable magnetic
switch MMS-P 22 X X X X X X X
Inductive proximity switch
IN 80 X X X X X X X X
Reed switch RMS 80 X X X X X X X X
Flexible position sensor
FPS-F5 with FPS-S M8 X X X X X X X X
Analog position sensor
APS-M1 X X X X X X X X
Optical distance sensor
OAS X X X X X X
Analog position sensor
APS-Z80 X X X X X X X X
Radio system RSS R1/T2
with Reed switch RMS 80 X X X X X X X X
Force-measuring jaw FMS X X X X X X X X