Assembly
02.00 | GSW-M | Assembly and Operating Manual | en | 389114
13
4 Assembly
4.1 Mechanical connection at the toolholder
WARNING
Risk of injury when machine/system moves unexpectedly!
•
Switch off power supply before assembly and installation.
•
Make sure that no residual energy remains in the system.
NOTICE
Severe damage at the shank of the GSW-M if it is used together
with a shrink holder.
•
Do not use a shrink holder.
Mounting
Assembly options
Ø
Check whether the O-rings (2) are inserted at the shank. If re-
quired, insert the O-rings (2).
Ø
Clamp the GSW-M with the shank or via the clamping face (1) in
the toolholder.
