Maintenance
07.00 | GSM-P | Assembly and Operating Manual | en | 389104
43
Assembly
For assembly, observe the permissible tightening torques as well
as the greases and adhesives to be used
Screw tightening torques
[
}
40] and
Grease/greasing areas
[
}
39].
Ø
Repeat steps 1 to 14 of the gripper assembly without mainten-
ance of the gripping force
Version without maintenance of grip-
ping force unit GSM-P
[
}
41]. However, the bushing has item 46
and a spring (121) is installed to maintain the gripping force.
Ø
With the variant with maintenance of the gripping force, make
sure the spring (121) is inserted in the bushing (46) between
steps 12 and 13 of the assembly without maintenance of the
gripping force.
"I.D. gripping" version GSM-P-...-IS:
Disassembly
Ø
Repeat steps 1 to 11 of the gripper disassembly without main-
tenance of the gripping force
Version without maintenance of
gripping force unit GSM-P
[
}
41]. However, the bushing has item
46 and a spring (121) is installed to maintain the gripping force.
Ø
Carefully clamp the gripping module between the cover housing
(35) and piston (36), since the two parts are under spring tension.
Assembly
For assembly, observe the permissible tightening torques as well
as the greases and adhesives to be used
Screw tightening torques
[
}
40] and
Grease/greasing areas
[
}
39].
Ø
Repeat steps 1 to 14 of the gripper assembly without mainten-
ance of the gripping force
Version without maintenance of grip-
ping force unit GSM-P
[
}
41]. However, the bushing has item 46
and a spring (121) is installed to maintain the gripping force.
Ø
With the variant with maintenance of the gripping force, make
sure the spring (121) is put on the piston (36) between steps 9 and
10 of the assembly without maintenance of the gripping force.