Maintenance
GSM-P manufactured after 05/2019:
Correct assembly position is marked on the socket.
1. Insert new O-ring (3) into groove of socket (4).
2. Insert gripping module (2) into socket (4) and align so that the
arrow marking of the socket points to the dot marking of the
gripping module.
3. Using new screws (1) from the spare parts package, screw the
gripping module (2) firmly onto the socket (4).
Note: Observe max. tightening torque!
4. Secure all compressed air lines.
8.6.2 Changing the gripping module – GSM-P 40-64
Disassembling
1. Remove all compressed air lines.
2. Loosen and remove both screws (1).
3. Remove gripping module (2) from socket (4).
before
05/2019
GSM-P year of
manufacture
as of
05/2019
Assembling
Clean all parts thoroughly and check for damage and wear. When
assembling, use the parts from the spare part package. Grease all
parts using supplied brush and lubricant.
45
11.00 | GSM-P | Assembly and Operating Manual | en | 389104
Summary of Contents for GSM-P 32
Page 59: ......
