Commissioning
02.00 | EMH | Assembly and Operating Manual | en | 1393220
25
6.3 Signal sequence "Product ready for operation"
The "Product ready for operation" signal is always switched on. If the
signal switches off, then there is an error, such as a cable breakage.
Signal sequence "Product ready for operation"
1
Force signals A and B
,
23].
2
"Product ready for operation" signal:
during the "Magnetization" and "Demagnetization" processes, the signal retains the
status that was last valid prior to setting the force signals. The status is updated after
approx. 7 ms at the earliest, when the respective process is complete.
3
"Demagnetization" signal
4
"Magnetization" signal
