Maintenance
22
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
6 Maintenance
6.1 Maintenance and lubrication intervals
NOTICE
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Size
50 - 80
Interval [Mio. cycles]
1.5
6.2 Lubrication
During maintenance, certain parts should be coated with oil or
grease (basic lubrication). At every maintenance of the AGE-Z all
seals must be renewed. The complete sealing kit can be ordered
from SCHUNK.
6.3 Disassembling the product
NOTICE
Take care not to damage any seals during assembly.
The complete sealing kit can be ordered from SCHUNK.
Ø
Remove the pressure lines and cable connections.
Ø
Unscrew the screws (25) and remove robot flange (2); then
remove the screws (26).
Ø
Screw out the screw (30) and simultaneously apply counter
pressure to the (27) and simultaneously screw out the cylinder
piston (6) and piston rod (5) from the housing (1).
Ø
Push the centering piston (4) with the cylinder piston (5) out of
the housing (2).
Ø
To assemble the module, complete the procedure above in
reverse.